Universal Devices ISY-994i Series, User Manual

Page: 473 / 692

Page | 450
18.2 ISY Portal Amazon Echo Integration (V3)
86
Please follow the instructions here to setup Echo to work with your ISY:
18.2.1 Changes in ISY Optimized for Smart Home V3
•
Proactive state update; this will allow to see the state of your devices on the echo
mobile app in real-time.
•
A/V Support through State Variables and Network Resources
•
Color bulb support (Aeotec, Fibaro) - REQUIRES FIRMWARE 5.0.11+
•
Slow devices like lock will no longer return an error, unless it's very long.
•
Locks will tell you if the lock is Jammed, or if the battery is low.
•
NOTES:
o
Thermostat behavior in Auto mode is completely different (see below)
o
You may no longer be able to use multiple ISYs with one Echo Account
18.2.1.1Proactive State Update
•
This will require the live update to be active. When you go to your Amazon Echo
device list, make sure to enable the Live Update -- NOTE: This may not be working
properly at this time
18.2.1.2Thermostat Auto mode behavior
•
When in Auto mode and requesting a specific temp, the V2 skill attempted to change
the appropriate setpoint. Now, the V3 skill will change BOTH setpoints, one below
the requested temp, one above the requested temp.
•
If in Fahrenheit, the dead band is 5 degrees, with heat being -2 and cool +3 from the
requested setpoint (Amazon's recommended numbers).
•
Asking Alexa to increase or decrease temp by [##] degrees will increase or decrease
both setpoints (just like in V2).
18.2.2 Instructions for Accessing ISY Portal
Please make sure you have ISY Portal Installed and Configured first.
18.2.3 Instructions for New Users
•
Make sure you have followed all the steps in ISY Portal Installed and Configured
first.
•
Configure your Echo devices using the Instruction to configure Alexa devices in ISY
Portal below
86 (Universal Devices)