Facial/Manicure/Pedicure Stone Warmer – C6589T
Facial Manicure Pedicure Stone Warmer.doc
Page 3
Operations/Precautions
Warning: Electric shock, fire, or burn injuries can occur if this equipment is not used
properly. To reduce risk of injury:
Plug only into a 3-hole grounded electrical outlet.
Use only on flat, level surfaces.
Unplug the Facial/Manicure/Pedicure Stone Warmer and let it cool before cleaning or moving it.
Unplug the Facial/Manicure/Pedicure Stone Warmer when not in use.
Do not immerse in water.
Do not spray with water or cleaning agent.
Handle hot water carefully.
Do not operate the unit unattended.
Do not operate the Facial/Manicure/Pedicure Stone Warmer without water in the unit.
Always unplug the unit when not in use.
Do not allow children to operate the Facial/Manicure/Pedicure Stone Warmer.
The Facial/Manicure/Pedicure Stone Warmer should be used only for its intended purpose as described
in this manual.
Do not operate the Facial/Manicure/Pedicure Stone Warmer if:
•
It has a damaged cord or plug.
•
If it is not working properly.
•
If it has been dropped or damaged.
•
If it has been dropped into water.
If damaged, return the Facial/Manicure/Pedicure Stone Warmer to an authorized service center for
examination and repair.
Do not use the Facial/Manicure/Pedicure Stone Warmer outdoors.
Instructions for Use
1.
Place the Facial/Manicure/Pedicure Stone Warmer on a flat, stable surface.
2.
To warm stones for a stone massage:
•
Arrange the stones in the bottom of the Facial/Manicure/Pedicure Stone Warmer.
•
Pour enough water in the Facial/Manicure/Pedicure Stone Warmer to fully submerge the stones.
They should be covered with approximately 1” of water.
Do not overfill the unit.
Do not operate this unit without water in the unit.
3.
Place the cover on the Facial/Manicure/Pedicure Stone Warmer.
4.
Plug the Facial/Manicure/Pedicure Stone Warmer into a 3-hole GFIC outlet.
5.
To preheat the water and stones, turn the Control Dial to High. Leave the unit at that temperature for
15 minutes.
