4110 / 8110 Rear Panels
On the left, AC Power input receptacle. On the right, the MIC INPUT, LINE INPUT, and
LINE OUTPUT XLR
connectors. These connectors are discussed in the following sections.
MIC IN
LINE IN
LINE OUT
MIC IN
LINE IN
LINE OUT
4
3
2
1
4
3
2
1
POWER IN:
100-240V 50/60Hz
FUSE RATING:
T 4A 250V
REPLACE FUSE WITH SAME
RATING AND TYPE ONLY!
UNIVERSAL AUDIO, INC
SANTA CRUZ, CALIF. - U.S.A.
Figure 4:
4110 Rear Chassis
MIC
IN
8
7
6
5
4
3
2
1
LINE
IN
LINE
OUT
MIC
IN
LINE
IN
LINE
OUT
8
7
6
5
4
3
2
1
POWER IN:
100-240V 50/60Hz
FUSE RATING:
T 4A 250V
REPLACE FUSE WITH SAME
RATING AND TYPE ONLY!
UNIVERSAL AUDIO, INC
SANTA CRUZ, CALIF. - U.S.A.
Figure 5:
8110 Rear Chassis
Input/Output
Standard XLR input and output connectors are provided on the rear panel. Pin 2 is wired positive (hot)
on the LINE and MIC INPUTS. Pin 2 is positive on the LINE
OUTPUT when the front panel Polarity push
button switch is out (Off). Pin 3 is positive on the LINE OUTPUT when the Polarity push button switch is
pushed in and lit up (OUT
∅
).
AC Power
The 4110 / 8110 use standard, detachable IEC power cables.
Fuse/Mains
There is no user accessible fuse for the 4110 / 8110. The units have an internal power supply circuit
board with its own fuse.
8
