Univers by FTE U4149, User Manual

Page: 27 / 30

PAG . 27
English
rev 1.0
• [ / / ] — use these arrow keys to guide the
snake.
•[OK] — Pause/Play game
•[Exit] — Quit game and draw back to “Game” menu.
3. Othello
• Moving highlight to “Setup” and press [Left/Right] keys to
select the game level (degree of diffi culty).
• Moving highlight to “Start” and press [OK] key to start the
game.
• Moving highlight to [Cancel] keys and press [OK] key to
draw back from the game.
• Start on the game:
• [
/------- use these arrow keys to guide chessman.
• [OK] — set chessman.
• [Exit] — Quit game and draw back to “Game” menu.
6.3 LOAD FACTORY DEFAULT
When you press [OK] key In the “Load Factory Default” item:
1. There will pop a dialogue for you to enter the password, and
the default password is “0000”.
2. After you input the correct password, there will show a
warning message to inquiry you “The operation will load
default and erase all the channels that user added,
continue?”.
3. If you select “Yes” option, the all revised parameters of the
receiver will reset to default value. Please carefully to using
this function.
4. In step 1 and step 2, press [Exit] key can draw back from
this item and without saving.
6.4 SOFTWARE UPGRADE
1. We offer the functions for user to connecting receiver
(Master) to the other receiver (Slave) via serial interface to
upgrade software code and program list.
2. Connect master receiver to slave receiver via serial interface.
Enter “Software Upgrade” menu in master receiver and
press [
] keys to switch upgrade mode. Upgrade modes
include: allcode / maincode / videoback / radioback /
defaultdb1 / userdb
3. Turn on slave receiver and it needn’t operate any setting.
4. Moving highlight to “Start” on master reeciver and press
[OK] key to start upgrade.
5. Press [Exit] key to save the parameters and draw back.
For more information about software upgrade, please visit
http://www.universbyfte.com
TOOLS