UNITY Lasers s.r.o.
Elite Pro series Operation Manual
(Revision 2020-7)
20
Front & Rear panel view (Elite 3 PRO)
NO.
Name
Function
1
Laser aperture
Laser output, do not look directly into this aperture
2
Aperture masking
plate
Can be moved up and down when two locking bolts are loosened. The
masking plate can also be attached to the top of the aperture.
3
Laser emission
When this indicator is lit up the laser system is ready to emit the laser
radiation as soon as it receives instructions from control software.
4
3-Pin Interlock
Laser output is available only when the interlock is connected.
It could be used to connect a laser emergency switch.
5
Key switch
Turn the key switch ON to allow laser output.
6
Power ON/OFF
Power on/off
7
Fuse
Current rating 3.15A, slow acting type.
8
Power in & out
AC100~240V power input and output sockets. With output feature you
can connect the device to one another using the input and output
sockets. They must be the same fixtures. DO NOT mix fixtures.
9
DMX Input/Through
Use these ports to connect DMX control signal or to daisy chain the
DMX signal between multiple laser display systems.
10
FB4 laser control
interface
11
DB25 OUT
DB25 interface out for ILDA mode
12
Safety eyelet
Use this together with appropriate safety wire to secure the system
against unexpected fall.
