Unity Audio BOULDER MK II, Owner'S Manual

Page: 9 / 20

Boulder user manual v1.1
9
FUSE REPLACEMENT
The fuse is located on the rear of THE BOULDER in the fuse holder between the power
switch and IEC mains input socket [see below].
Remove the mains lead. Prise out the fuse holder by placing a small slotted
screwdriver into the slot located on the underside and near the front of the fuse
holder.
Carefully pull the fuse holder outwards.
Replace the fuse {see ‘Specifications’ (p.15) for fuse type.}. Push the fuse
holder back into position. WARNING: only replace the fuse with the correct value
fuse.
CABINET CARE
Clean the cabinet with a soft, lint-free cloth. The use of solvents or abrasive cleaners
should be avoided.
fuse holder
place screwdriver here