13
12
Functional test of uMic
After pairing to your streamer,
perform a quick functional
test by gently tapping on the
microphone opening.
You should clearly hear the
tapping noise in your hearing aids.
Line of sight between the uMic and the
streamer is usually not required. If the audio
transmission ends abruptly, refer to the
troubleshooting guide.
Switch the uMic off and on again to turn the
device on from sleep mode.
If the red “low battery” blinks:
•
Battery level is <20%
•
Less than 1.5 hours are left for streaming
•
Consider charging the uMic
The uMic can also be charged during operation.
Summary of Contents for uMic
Page 1: ...uMic guide Guide du uMic ...
