PROFILER REVOLUTION LITE (REF. 6701)
7
DISPLAY READOUT
EXPLANATION
Tap Add Channel to add channel.
Up to 6 channels can be added at once.
First select the starting channel (e.g. CH5) and tap to
confirm. Then select the stop channel (e.g. CH7, this
means that you will add 3 channels). Tap to confirm.
Then you can convert them using the rotary button
(e.g. CH5 to CH7 converts to CH8 to CH10) and tap to
confirm.
Some other examples:
To add CH5 and convert to CH6,
select as follows: 5: 5
→
6: 6
To add CH21-22-23 and convert to CH31-32-33,
select as follows:
21:23
→
31:33
Remark 1: The value 85dBµV (in the bottom right
corner) indicates the incoming level of the channel.
Remark 2: For EU, Italy and New-Zealand region,
Channel 13 (230-240MHz) can be used. CH13 cannot
be converted.
For optimal performance we recommend to only add single channels, unless you
need to process a lot of channels.
DISPLAY READOUT
EXPLANATION
To add another (group of) channel(s), scroll down to
ADD CHANNEL and tap to confirm.
To prevent bad quality or scrambled images, make
sure that only one input channel is assigned to one
output channel. If 2 channels are assigned to the same
output channel, a star (
) will appear.
The same applies for adding multiple channels. Make
sure that each output channel is selected only once.
After this, the correct LTE filter will be set for the UHF inputs (possible filters are 694MHz,
790MHz or OFF). If the channels are lower than 48, the 694MHz filter is activated. The 790MHz
filter is activated for the channels lower than 60.
