USB Dongle Series Model:UD-731N
UniTraQ International Corp.
RoHS compliance
.
2011,01, Version 1.1
11
8.1.2 Starting u-center
After a successful installation, u-center will start up as shown in Figure 1:
Figure 1: Start Display
8.1.3 Configuring the Serial Connection
When u-center is started for the first time, the COM port needs to be initialized. u-center
supports the COM-Settings listed below and all u-blox GPS receivers are pre-configured
this way.
Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: none
Press the arrow in the Connect/Disconnect-Button and select the used COM-Port.
As soon as u-center is synchronized to the GPS receiver, the
Connect/Disconnect-Button on the Receiver Tool Bar changes the color to green and the
display shows information about the satellite constellation, signal to noise ratio, time etc.
