05
PREVENTION OF BURNS
To protect your eyes and skin from burns and ultraviolet rays:
- wear dark glasses. Wear suitable clothing, gloves and footwear.
- use masks with closed sides, having lenses and protective glass according to standards (degree of
protection DIN 10).
- warn people in the vicinity not to look directly at the arc.
PREVENTION OF FIRE
Plasma cutting produces splashes of molten metal.
Take the following precautions to prevent fire:
- ensure that there is a fire extinguisher in the welding area.
- remove all inflammable material from the immediate vicinity of the welding area.
- cool the cut material or let it cool before touching it or putting it in contact with combustible material
- never use the machine for cutting containers of potentially inflammable material. These containers must be
completely cleaned before they are cut.
- ventilate the potentially inflammable area before using the machine.
- do not use the machine in atmospheres containing high concentrations of powders, inflammable gases or
combustible vapours.
LIFTING
WARNING! The UPC-85 ML weights 45kg / 100 lb.
Lifting by hand:
Lift the machine using the two handles provided
.
Lifting with hoist and strap
Lift the machine by using ONLY both handles as shown on the picture.
Keep the machine as horizontal as possible
INSTRUCTION FOR INSECURE POSITIONING
Failure to properly secure the machine can cause personal injury. If machine is in an insecure position do not
attempt to switch on. Do not put the machine on an unlevelled surface greater than 10°.
Summary of Contents for UPC 85 ML
Page 1: ...01 Instruction manual UPC 85 ML Air Plasma Cutter...
Page 21: ...21 9 WIRING DIAGRAM...
Page 22: ...22 10 PARTS LIST...
