User Manual For Video Intercom System 3000F rev.10. 03-28-16
Page 5
5.
Intrusion Alarm System
A)
Setting or Changing the Security Code
To change the security code - call the concierge from the apartment unit and
remain on the line.
While on call, request concierge or superintendant to initiate procedure to
change the security code.
A single tone sounds from the apartment unit indicating the reset function is
activated.
Enter a new 4-digit security code on the apartment unit keypad.
A tone sounds each time a number on the keypad is pressed indicating it was
recognized by the system.
When finished keying the new code, then press
Enter
.
The resident and concierge may now end the call.
If concierge and/or super is not available call the Building Management
Office and ask to have your code changed.
The security code remains confidential:
it is not displayed on the screen or
Written to the system log.
B)
Intrusion Alarm - Away Mode*
To Activate:
Make sure the front door is closed.
Press "AWAY"
button, the red light will illuminate.
Leave apartment within 30 seconds.
To Deactivate:
Upon your return when you open the door, the unit will beep to remind you to
enter your code. After 30 seconds the local alarm will sound.
