Control connection
DS 400-2
04/2019 - V01
42
Res
ol
ver
co
nne
ct
io
n
5.6
Resolver connection
Only for version RS
DSx-BAx-DPC/E-DS-400-Reso-anschluss-3
The resolver is an absolute
measuring system for a motor
revolution.
It is robust and not impaired by high
motor temperatures.
Its build corresponds to a revolving
transformer. The rotor is supplied by
the reference (10kHz). The stator
supplies the sine and cosine signals
modulated by the rotational
frequency. The amplitudes of these
signals are analyzed and digitalized in
the servo-drive. The resolution is
automatically and optimally adjusted
to 10, 12, or 14 bit.
The max. possible speed is 50 000
(10bit).
The digitalized signals are used for
the polar wheel angle, the position
and speed control, and the
incremental output.
DS/BAx/DPC - DS-400-stecker-reso
Use only motors with a 2-,4-,6-, or 8-pole resolver which have been approved by the
manufacturer. Observe the motor specific connection data sheet (RS)!
Connector
X7
15-pole D-connector
Connecting cable
4 x 2 cores, twisted in pairs and shielded, additional overall shield.
For link chains use appropriate cables!
cable length
for >25m only use high-quality resolver cables with adequate shielding
properties.
Shield connection
across connector X7
combine all shields and
connect them to the housing
across the motor connector
connect the overall shield tot he
connector housing
Setting parameters
see Software-Manual DS
Steckerbelegung
Lötseite
REF1
REF2
13
4
2
15
14
3
COS2
COS1
SIN1
SIN2
REF1
REF2
10nF
10nF
2x2u2
2x2u2
1k
100nF
47
47
TEMP
Motor-Stecker
Resolver
12
6
Motor
Temperatur
REF1
REF2
SIN1
SIN2
COS1
COS2
R1
R2
S2
S4
S1
S3
DSxx/BAxx
Schirm am Steckergehäuse
Shield at connector housing
Schirm am Steckergehäuse
Shield at connector housing
Motor-connector
D-Stecker X7
D-connector X7
