Basic informationen
Edition: 2020 / V4
Page: 9
BAMOCAR-PG-D3-700/400-400
The user must draw up a hazard analysis for this machine, vehicle or installation.
The user must ensure that in the event of:
- device failure
- incorrect operation,
- loss of regulation or control
the axis will be safely de-activated.
It must also be ensured that the vehicles, machines, equipment, or
vehicles are fitted with device independent monitoring and safety
features.
The user must take appropriate measures so that man as well as
property are not exposed to danger due to incorrect or improper
movements at any time!
During operation, the device must be closed.
All plugged connectors must be snapped properly or secured by
screws.
The safety systems must be enabled.
When the device is open and/or the safety systems are de-activated,
it must be ensured by the operator that only skilled and suitably
trained personnel has access to the units.
Assembly
- should only be carried out when all voltages have been removed and the units are secured
- should only be carried out by suitably trained personnel
Installation
- should only be carried out when all voltages have been removed and the units are secured
- should only be carried out by suitably trained personnel for electrics
- should only be carried out in accordance with health and safety guidelines
Adjustments and programming
- should only be carried out by suitably trained personnel with knowledge in electronic drives and
there software
- should only be carried out in accordance with the programming advice
- should only be carried out in accordance with health and safety guidelines
