Unitedlink UniSign-3812A, Manual

Page: 11 / 34

DOC. NO.
：
Page 11
Get Function
The supported commands are:
Get Function
Command
Code(ASCII) Command
Code(Hex)
Send Value
Range Response Value Range
Contrast a 61 000 0000~0100
Brightness b 62 000 0000~0100
Sharpness c 63 000 0000~0100
Hue d 64 000 0000~0100
Input Source j 6A 000 0000 : VGA
Power Status l 6C 000 0000 : Standby
0001 : Power On
Picture Size n 6E 000 0000 : Full
0001 : Zoom
Display
Portion o 6F 000 0000 : Top
0001: Middle
0002: Bottom
Get ACK z 7A 000 0000 : Live
No Signal : The display is
not boot up.
The Get Function format (from PC to Monitor) is
Name Length Command Value1 Value2 Value3 CR
Byte Count 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes order 1 2 3 4 5 6
PC Monitor
Get Command
Reply
RS-232