Unitedlink UniBox-3240, User Manual

Page: 31 / 69

31
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4 : 5V Standby power (option)
Pin5-6: 12V Standby power (option)
JP6
：
(2.0mm Pitch 2x3 Pin Header), COM6 setting jumper, pin 1~6 are used to
select signal out of pin 9 of COM6 port.
JP3 Pin# Function
Close 1-2 RI (Ring Indicator) (default)
Close 3-4 COM6 Pin9=+5V (option)
Close 5-6 COM6 Pin9=+12V (option)
COM6(SBC-7111/COM4)
：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM6 port is controlled by pins No.1~6 of
JP6 ,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP6.
Pin# Signal Name
1 DCD# (Data Carrier Detect)
2 RXD (Received Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 Ground
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 JP6 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4 : 5V Standby power (option)
Pin5-6: 12V Standby power (option)
S1
：
PWR BT: POWER on/off Button , They are used to connect power switch
button. The two pins are disconnected under normal condition. You may
short them temporarily to realize system startup & shutdown or awaken the
system from sleep state.
PWR LED: POWER LED status.
S1 Model
Yes TB-528C1U2P1