OPERATION
NOTE:
1. The motor of the appliance is equipped with a thermal safeguard. This device
automatically switches the appliance off in case of overheating. If this occurs, proceed as
follows:
a) Switch the appliance off and remove the plug from the wall socket.
b) Allow the unit to cool. When the unit has cooled down, check and clean the filters.
c) Re-insert the plug in the wall socket and switch the appliance on.
2.The accessories provided can be used in various combinations, depending on the task, as
follows
: stick
mode
and
portable mode.
Important!
Do not suck up toner, plaster, cement, stone dust or drill dust. The sucking up of these
materials blocks the filter. After vacuum cleaning switch off the device when you have
finished cleaning
.
Stick mode
WARNING:
Before assembling or disassembling the
accessories always ensure that the device has
been unplugged from the mains socket!
Make sure that the appliance is switched off and
unplugged.
Assembly the accessories
1. Assembly the stick
The attachment of the stick can increase the working area. With this, you can reach corners
and inconvenient places.
Insert the stick to the hole at the back of unit. The click of ball at the side of unit, means that
the stick has been put correctly.
Summary of Contents for VC1150
Page 1: ...By AMIRIDIS SAVVIDIS S A...
Page 4: ...COMPONENTS AND EQUIPMENT...
