background image

EN - 17

Start/Pause button

By pressing on the Start/Pause button, 

you may start the programme you have 

selected or suspend a running programme. 

If you switch your machine to the standby 

mode, the Start/Pause led on the electronic 

display will blink.

 

5.8 

Child Lock

The Child Lock function allows you to lock 

the buttons so that the wash cycle you have 

chosen cannot be changed unintentionally.

To activate child lock, press and hold 

button 2 and 3 simultaneously for at least 

3 seconds. ‘’CL’’ will flash on the electronic 

display for 2 seconds when the child lock is 

activated. 

If any button is pressed or selected 

programme is changed by the programme 

dial while the child lock is active, the “CL” 

symbol will flash on the electronic display 

for 2 seconds.

If the child lock function is active and 

a programme is running, when the 

programme dial is turned to the CANCEL 

position and another programme is selected 

the previously selected programme 

continues from where it was left. 

To deactivate the child lock, press and hold 

button 2 and 3 simultaneously for at least 

3 seconds until the “CL” symbol on the 

electronic display disappears. 

5.9 

Cancelling the Programme 

To cancel a running programme at any 

time:

1.

Turn the programme dial to the “STOP”

position.

2.

Your machine will stop the washing

operation and the programme will be

cancelled.

3.

Turn the programme dial to any other

programme to drain the machine.

4.

Your machine will perform the

necessary draining operation and

cancel the programme.

5.

You can now select and run a new

programme.

5.10 Programme End

Your machine will stop by itself as soon as 

the programme you have selected finishes.

“- -

” will flash on the electronic display.

• You can open the machine’s door and

remove the laundry.

• Leave the door of your machine open

to allow the inner part of your machine

to dry.

• Switch the programme dial to STOP

position.

• Unplug your machine.

Turn the water tap off.

Summary of Contents for UWM-8108

































Reviews: