QUICK USER MANUAL
5
Display Panel (*)
6
Operating Your Machine
7
Removing Laundry
On the display panel, you can see the washing delay timer of your machine, temperature selection of your
machine, the auxiliary functions you have selected and the stage of the programme you are running on your
machine ( pre wash / wash state, rinsing stage, wringing stage).
The display panel will not only warn you with LED combinations that would flash on its indicators when an error
is simultaneously occurred on your machine, but also reports you that the washing program is finished by the
appearance of ‘Finish LED’ on its indicator when the washing program you selected is ended.
9
6
7
8
11
5
1
2
3
4
1- Wash
2- Rinse
3- Spinning
4- Finished
5- Delayed start auxiliary function
6- Temperature selection adjustment
7- Auxiliary Function Button 1
8- Auxiliary Function Button 2
9- Start/Pause Button
10- Additional Function Leds
11- Display Panel
(*) Auxiliary functions vary depending on the model of your machine.
By pressing on Start/Pause button, you
may start the programme you have
selected, suspend a running programme.
- After a program is
completed, the washing
machine will turn off
automatically.
- End led will blink on the
display panel.
10
8
Maintenance
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalance load control
system will try to distribute
your laundry evenly to
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
52261511
