1. Place the rear section of the stand onto the base of the tower fan. Lower the front half of
the stand on top of the rear half of the stand such that the two latch together,ensure that the
mains cable is fed through the hole in the center of the stand.
2. Attach the stand onto the base of the tower fan by threading the nut through the stand
assembly and into the base of the tower fan.
OPERATING INSTRUCTIONS
1. Make sure the fan is on a stable surface when operation.
2. Put the plug into the outlet.
Tower Fan Operation Instructions:
POWER
,
SPEED
To turn on the fan,
press “
POWER
” button once,
it will start at low speed fan setting. To
select the fan speed,
continue
pressing
“SPEED” button to
the
desired speed
setting
(Low,
Medium,
High).
To turn it off,
press “
POWER
” button once again.
TIMER
The timer can set up to 7 hours.
Continue to press “TIMER” until the timer
indicators ( 0.5H/1H/2H/4H) illuminate to your desired time.It will turn off when time is
reached
.
MODE
After the fan start
s
-up,
press “MODE” to select wind mode.
Press the button to choose
between 3 levels of wind
(
NORMAL-NATURAL-SLEEP
)
.The lights will indicate the wind
mode setting.
-Normal: In this mode the fan operates at a constant speed.
-Nature: In this mode the fan simulates a natural breeze mode by cycling on and off,
as in
nature.
-Sleep: In this mode the fan simulates a soft,
natural breeze suitable for night-time use.
OSCILLATION
To activate
oscillation,
press “OSC” button once
.
To deactivate
oscillation,press “OSC” button once again.
