ASSEMBLY
1. Base Assembly
Put the end bottom of the outer tube into the centre hole of the
base and fix it tightly with the 4 screws and 4 nuts.
2. Fan Motor Assembly
Connect the motor and switch box with the inner tube and fix them
using the screw.
To adjust the height, loosen the height adjustment screw, slide the
inner tube to the desired height and tighten again.
3.
Rear Guard Assembly
Put the rear guard on the front motor housing guides, fix it
tightly by turning the nut clockwise.
4. Fan Blade Assembly
Push the fan blade on the motor shaft. Secure the fan blade with
the blade cap, turning anti-clockwise to tighten.
5. Front Guard Assembly
Attach the front and rear guard firmly by locking the clips, make
sure the safety screw is fixed with the nut.
