STRUCTURE
1.
FRONT GUARD
2.
FAN BLADES
3.
GUARD MOUNTING NUT
4.
BACK GUARD
5.
MOTOR SHAFT
6.
MOTOR HOUSING
7.
SWITCHES
8.
SWITCH COMPARTMENT
9.
LOCK SPRAIN
10.
UPPER TUBE
11.
TUBE CONNECTOR
12.
LOWER TUBE
13.
ROUND BASE
SPECIFICATIONS
VOLTAGE
FREQUENCY
POWER
220-240V~ 50Hz
50W
ASSEMBLY
1.
Secure lower tube with tube support to the hub of Round Base with screw provided.
2.
Extend upper tube, insert the tube connector through upper pipe onto lower tube and tighten.
3.
Attach the motor with switch compartment onto the upper tube. Ensure the switch compartment
is pushed fully onto the upper tube and secured with the screw provided.
4.
Loosen Guard Mounting Nut from the Motor Housing.
5.
Position Back Guard firmly to Motor Housing and then fasten by turning Guard Mounting Nut
clockwise tightly.
6.
Push the Blade along Motor Shaft. Fasten it firmly with Spinner by turning counter clockwise.
7.
Place the front grille securely on top of the back grille and lock in place using the securing clips.
OPERATION CONTROL
♦
Before using the fan, make sure that it is on a flat and stable surface. Damage may occur if the
fan is placed on an incline.
♦
Insert the plug directly into a standard AC socket-outlet. Be sure that the plug fits tightly into the
socket-outlet.
How to operate the remote control:
You can operate the fan by the remote control in 10 meters distance.
Speed/on: Press the button in remote control to turn on the fan, press one time to get the low speed,
press the second time to get middle speed, press the third time to get high speed.
Mode: Press the button in remote control to select the wind mode, press one time to get natural wind,
press the second time to get sleepy wind. Press the mode button by the third time to get normal
wind.
Timer: Press the button in remote control to use the timer. There are 4 settings in the timer, 0.5h, 1h,
2h, 4h. If 1h indicator lights shows then you have set 1 hour timer, If two indicators light, for example
0.5h & 2h together, then you have set 2.5h timer. If all the indicators light, then you have set 7.5h
timer.
Off: Press the button in remote control to turn off the fan.
How to operate the fan with the switch panel directly
If you do not want to use the remote control, you can operate the fan with the switch panel in the
fan.
Speed/on: Press the button to turn on the fan, press one time to get the low speed, press the second
time to get middle speed, press the third time to get high speed.
Off: Press this button panel to turn off the fan.
Timer: Press the button in the fan switch panel to use the timer. There are 4 settings in the timer,
0.5h, 1h, 2h, 4h. If 1h indicator lights shows then you have set 1 hour timer, If two indicators light, for
example 0.5h & 2h together, then you have set 2.5h timer. If all the indicators light, then you have set
7.5h timer.
Swing: Press this button to start the oscillation of the fan
