VII. Maintenance
Cleaning: before cleaning and maintenance, turn off the machine and unplug the plug.
1.
Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as benzene, alcohol, gasoline,
etc.; otherwise, the surface of the air conditioning will be damaged or even the whole machine will be damaged.
2.
Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is reduced, be sure to clean
the filter screen once every two weeks.
2.1: Clean the upper filter screen frame
1) Clasp the wedging block of the EVA filter screen frame with hands. Force down from the outside to remove
the EVA filter screen frame. Unscrew four screws fixing the EVA filter screen and the rear housing to remove the
EVA filter screen (as shown in the above figure) .
2) Put the EVA filter screen into warm water with neutral detergent (about 40
℃
/ 104
℉
) and dry it in the shade
after rinsing clean.
Unit Storage:
1: Unscrew the drainage cover, unplug the water plug, and discharge the water in the water pan into other water
containers or directly tilt the body to discharge the water into other containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the drainage pipe
becomes dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping post; install the
water plug and the drainage cover.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it out of the reach of
children, and take dust control measures.
Remove screws