2) Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the
hole of the window sealing plate assembly (as shown in Fig.5 and Fig.6) .
Notes: 1. the flat end of the exhaust pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater than 45 °).
Keep the ventilation of the exhaust pipe not blocked.
Important Notice
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the
specifications of the air conditioning. Do not use extension tubes or replace it with other
different hoses, or this may cause a malfunction. Exhaust host must be not blocked;
otherwise it may cause overheating.
IV. Control Panel Setting
I. Operating instructions:
LED Control Panel is as follows:
1. Timer Key
2. Up Key
3. Down Key 4. Display Window 5.
Fan Speed Selection Key 6. Mode Selection Key 7. Power Key
Fig.5
Fig.6