number 18 is in line with the arrow pointer.
3. Set the time the heater is required to run by pulling the
segments around the outer ring outward appropriate to the
running period(s) required.
4. When set, the heater will operate each day during the time
programmed. Note, the heater must always be plugged into a
power socket, the element switches must be in the “on” position
and the thermostat must be suitably set to ensure the heater will
come on.
5. If the heater is required to run continuously, the slide switch on
the timer should be set to the “I” position.
6. If it is subsequently required to revert back to timer operation,
the slide switch on the timer should be set to the central (clock)
position.
7. Note:- When using in timer mode, due consideration should be
given to the fact that the heater may come on whilst unattended.
TIMER
Fan Operation
1.The fan can be switched on by means of the push button on the
fan unit within the control panel. The fan is switched on when the
push button is in the inward position and off when the button is in the
outward position.
2.Note:- The fan will only operate when the timer must either be in the
override position (slide switch next to the “I” symbol) or at some point
during the timed “on” position.
STORING YOUR OIL-FILLED RADIATOR
1. Save the box for off season storage.
2. Clean the heater following the cleaning instructions above.
3. Remove the wheel base assemblies.
