automatically. The service lamp then goes out.
−
If the device switches itself off, disconnect the mains plug from the socket. The heater is ready
for service again after a short cooling-off phase (approx.15 minutes). Plug the mains plug back
into the socket.
−
If this repeats itself, first check whether the thermostat switch is set correctly or if objects
hinder the heating operation.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. Do not use
any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean dry place.
Note: this appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
