SAFETY INSTRUCTIONS
Warning:
To reduce the risk of fire, electric shock, or personal injury, read the
following instructions very carefully:
READ THESE INSTRUCTIONS
1. The fan should not be connected to any power point. Install the fan on the ceiling.
2. The minimum distance between the blades and the floor must be 2.3m. If you
use a hook to hang the fan, the maximum weight capacity is 100kg.
3. Make sure that you cap with wire connectors. Make sure to cap the wires you will
not use with a wire connector.
4. Disconnect the fan from the mains power before mounting or repairing.
5. The cable must be properly earthed in order to avoid any risk of electrocution.
6. Installation by a qualified electritian is highly recmmended.
7. Never install the fan in a room with a high degree of humidity.
8. Be careful when you are close to the fan blades.
9. If the supply cord is damaged
it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
10. This appliance must be installed following the national regulations for electrical
installation.
11. This appliance is designed for dry places (Don’t use in wet places).
12. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
13. Children should be supervised to ensure that they do not play with the appliance.
14. WARNING: In order to ensure children’s safety, please keep the contents of the
package out of their reach (plastic bags, polystyrene, boxes etc.).
15. Important: always turn off the electricity supply to the ceiling fan during
installation or maintenance. It is recommended to remove the fuse or turn off the
circuit – breaker connector when handling (switching it off is not enough).
16. Before operation make sure that all connections are secured, to prevent the fan
from falling.
