&RQVXPDEOH5HSODFHPHQWV
Replacement Supplies
Replacing the Feed Roller
The feed roller and the paper separator block are consumables.
Please replace with new ones when the feed roller and the paper separator
block have been worn down and no longer can feed paper normally.
Replacing the Paper Separator Block
Paper separator block
(separation pad)
Feed roller
Please make sure to unplug power before replacing
the feed roller. Then open the safety cover, press on
the feed roller set to slide in the direction of the arrow
until the main shaft is separated f rom the connection
pin, then remove the feed roller set.
Remove feed guide wheel and old feed roller from
the shaft, replace it with the new feed roller and
place the feed guide wheel back. After inserting
shaft, double check the shaft is aligned with the
connecting pin. Feed guide wheel optimum
position is to be placed 1in inside the paper.
The paper separator block has 3 sides
that may all be used. When replacing
the block or changing to another side,
remove the feed roller shaft first
and replace the paper separator block
as shown in the figure.
Without gap
(Feed Table)
（
Side view
）
(Rollers)
With gap
-10-
