EN - 3
E N
39HXC and 39HXE models
Splitting procedure for multi-block AHUs
1.
Remove the 4 nuts and screws
2. Undo
the screws on each beam and remove them.
3. Disconnect
the electrical connectors on the control and disconnect switch
4.
You can now separate the blocks.
Note: Follow the procedure in reverse to re-couple the blocks.
When uncoupling the blocks, ensure that the 18X10 PVC gasket located between the blocks remains
correctly in place to guarantee a perfect seal. If necessary, fit one.
NB
: if there is a roof, remove it first in accordance with the instructions given on the roof fitting plan (see technical
specifications).
2
