MAINTENANCE
CLEANING THE CRYSTAL SCREENS T-OLED
Both after installation and throughout the life of the display, appropriate cleaning will be necessary.
METAL SURFACES
These can be wiped with an absorbent towel. Do not allow any liquid to get into the foot with the
electronics!
DISPLAY FRONT AND IR FRAME
Use a soft, lint-free cloth or paper. Microfibre cloths are best suited.
Use a high-quality glass cleaner suitable for LCD screens. A Premium Isopropanol (IPA) cleaner can also be
used alone or as a supplement to a glass cleaner. Use IPA separately from the glass cleaner, i. e. do not mix
it. Ideally, you should use different cloths for each liquid.
Note:
IPA is flammable. Do not use the cleaner near open flames or other sources of ignition.
Glass cleaners or IPA must NOT get into the electronics base or into the area between display glass and
display housing/IR frame.
Apply cleaning fluid, glass cleaner or IPA sparingly to a cloth (not directly to the glass surface) and start on
one side of the screen. Wipe the screen evenly under circular movements. If you do not get a streak-free
surface, increase the amount of cleaning agent on the cloth and change the cloths more often.
CLEANING THE BACKSIDE OF THE DISPLAY GLASS
Use the same materials as described above. Liquids must not get into the area between the back of the
display and the display chassis. Be even more careful. The back of the display has no protective glass.
Make sure that you use a clean cloth which is free of hard residues (crumbs, chips, etc.).
© 2017 united
.screens
GmbH
