© United Products 2017
Designed in Australia
01
02
03
04
05
06
Installation Manual
Installation Instructions - If you have any doubts please contact us: [email protected]
01. Position basin. Standard height 900mm from finished floor.
Verify integrity of wall or load-bearing noggins are in appropriate position for basin installation.
02. Use hole saw and drill waste hole. In level vanity surface. Waste recommended minimum 90mm from finished wall.
03. Install waste specified for the basin
04. Invert basin, confirm surfaces are clean and dry. Apply anti fungal silicone adhesive.
Place basin in position aligning waste. Ensure basin is level.
05. Alow silicone to cure . Ensure basin is level. Connect basin to waste
06. Clean with a soapy sponge, followed by a rinse. For stubborn stains such as lime scale or soap build up
use a mild abrasive cleaner like gumption®paste, jif® cream or ajax® cream or powder - use with a soft damp cloth
in wide circular motions. ENJOY
Ev
e Basin 1 007 001
900mm
90mm
