UNITED OFFICE UTB 250 A1, Operating Instructions Manual

Page: 23 / 32

- 21 -
Risk of electric shocks.
• Connect the appliance to a mains power socket
supplying a voltage of 220 - 240 V ~ /50 Hz.
• Do not operate the appliance if the power cable
or power plug is damaged.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• NEVER immerse the appliance in water.
Just wipe it with a damp cloth.
• Do not expose the appliance to rain and never
use it in a humid or wet environment.
• Ensure that the power cable never becomes wet
during operation.
• Unplug the appliance immediately after use. The
appliance is free of electricity only when you
remove the power plug from the power socket.
• Do not open the casing or attempt to repair the
appliance yourself. Should you do so, appliance
safety can no longer be assured and the warranty
will become void.
Risk of fire!
• Do not use the appliance in the vicinity of hot sur-
faces.
• Do not place the appliance in locations exposed
to direct sunlight as this could lead to overheating
and cause irreparable damage.
• Do not leave the appliance unattended when in
use do not use an external timing switch or a sepa-
rate remote control system to operate the appliance.
Caution - property damage!
• Never attempt to bind flammable, heat-sensitive
and/or meltable materials and do not bind drawings
made on temperature-sensitive paper or material
that could undergo changes in colour or quality
when subjected to heat.
• Fundamentally, never bind valuable or unique
documents. Although this thermal binder satisfies
all relevant safety norms and standards, functional
errors can never be completely discounted - as
with all electrical appliances. Functional errors
with the appliance could cause damage to the
documents being bound.
Description of the appliance
1
Binder shaft
2
Document holder
3
Power cable
4
ON / OFF switch
5
START button
6
Control lamp
7 Control lamp
Operation
Note:
On this first use the development of a light odour
may occur, caused by production residues (a slight
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation. Open a window, for example.
1. Ensure the appliance has a stable positioning.
2. Pull the document holder
2
out.