UNITED OFFICE UTB 250 A1 - 2, Operating Instructions Manual

Page: 24 / 32

- 22 -
3. Insert the plug into a mains power socket .
4. Switch the appliance on by pressing the ON /
OFF switch
4
. The red control lamp
7
glows.
• As soon as the green control lamp
6
glows the appliance has reached its operating
temperature. Additionally, an acoustic signal
sounds.
5. Select a suitable thermal binder cover for your
document:
Note:
Always select the next largest binder if you want to
bind more pages than are suitable for the binder.
For example, for 25 pages, please select a binder
of 3 mm.
6. Tap the sides of the sheaf of papers a few times
to ensure that ALL of the sheets are lying exactly
above each other.
7. Lay the sheets into a suitable thermal binder cover
and then tap them down a couple of times, against
and using the cover spine.
8. Slide the complete thermal binder brochure into
the binder shaft
1
until the spine of the brochure
makes firm contact with the hotplate on the floor
of the thermal shaft
1 .
9. Press the START 5 button. The control lamp 7
glows, the control lamp 6 blinks.
Number
of sheets
80g/m 2
Brochure
thickness in mm
max. 20 2 mm
max. 30 3 mm
max. 60 6 mm
10.As soon as an acoustic signal sounds and the
control lamp
6
glows constantly you can
remove the thermally bound brochure from the
binding shaft
1
. Place it in the document holder
2
so that the adhesive can harden. The binding
is sufficiently hardened after approx. 60 seconds.
11. After use, place the ON/OFF switch 4 at O
and remove the plug from the mains power
socket.
Note:
If you want to bind documents with more than 100 pa-
ges, repeat the binding process several times. For 300
pages you must carry out the binding process at least
2-3 times.
Cleaning and care
Risk of potentially fatal electrical
shock:
• Always remove the plug from the mains power
socket before you clean the appliance!
• Never open the housing of the appliance.
There are no user-serviceable elements inside.
• Never submerse the appliance into water or
other liquids!
➩
Allow the appliance to cool down completely.
➩
Clean the surface of the housing with a slightly
damp wash cloth.
➩
Ensure that moisture cannot permeate into the
appliance.
Note:
Allow the appliance to cool down before transporting
it or putting it into storage.
Store it at a dry and dust-free location.