GB│IE│NI
│
7
■
UAV 250 A1
Inserting credit cards
■
Insert the credit card from above into the middle of the CD/credit card cutter
opening
. You can only shred one credit card at a time. Always insert the
card into the CD/credit card cutter opening
with the wide side first.
Otherwise, the magnetic strip will not be destroyed.
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
. Otherwise, the shredding process will not start!
NOTE
►
If the shredding process does not start when you insert the credit card, care-
fully push the credit card further into the CD/credit card cutter opening
with a flat object.
NOTE
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
.
Note that the residue will then fall into the large waste container
.
If necessary, empty this beforehand in order to keep paper and plastic
waste separate.
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
■
Insert the CD from above into the middle of the CD/credit card cutter
opening
. You can only shred one CD at a time.
Clearing a material blockage
1) Move the switch
to the "REV" ("reverse") position if the paper being
shredded causes a blockage. The appliance now goes into reverse and
the paper that is being shredded is ejected.
2) Move the switch
to the "OFF" position as soon as the jammed material
has been ejected.
Turning off the appliance
■
Switch the appliance off by moving the switch
to the position "OFF".
Summary of Contents for UAV 250 A1
Page 3: ...B A ...
