■
8
│
GB│IE
UAV 300 A1
Inserting credit cards
Fig. 4
Insert the credit card from above into the middle of the
CD/credit card cutter opening
2
(see fig. 4) and move
the
REV/OFF/AUTO/FWD
switch
3
to the
FWD
(“forward”) position.
You can only shred one credit card at a time. Always insert
the card into the CD/credit card cutter opening
2
with
the wide side first. Otherwise, the magnetic strip will not
be destroyed.
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
2
. Otherwise, the shredding process will not start.
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
9
and move the
REV/OFF/AUTO/FWD
switch
3
to the
FWD
position.
Note that the residue will then fall into the large waste collector
w
.
If necessary, empty this beforehand in order to keep paper and plastic
waste separate.
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
Move the
REV/OFF/AUTO/FWD
switch
3
to the
AUTO
position for shredding. Insert the CD from above into the
middle of the CD/credit card cutter opening
2
(see fig. 5).
You can only shred one CD at a time.
Fig. 5
Clearing a material blockage
♦
Move the
REV/OFF/AUTO/FWD
switch
3
to the
REV
("reverse") position
if the material being shredded causes a jam. The appliance now goes into
reverse and the material is ejected.
♦
Alternatively, move the
REV/OFF/AUTO/FWD
switch
3
to the
FWD
("forward") position if the material causes a blockage. The appliance is now
in forwards operation and the material that is being shredded is pulled in
again.
♦
Move the
REV/OFF/AUTO/FWD
switch
3
to the
OFF
position as soon as
the jammed material has been ejected.
