UNITED OFFICE 314014, Operating Instructions And Safety Instructions

Page: 26 / 116

GB│IE
│ 23 ■ UAVS 300 A1
NOTE
► The large waste collector e must be pushed fully into the appliance base t
until you hear it click into place . Otherwise, the appliance will not start!
► The safety switch 4 will not be deactivated until the large waste collector
has been pushed in correctly, allowing the appliance to be used .
Transport
♦ The appliance comes with four castors 0 / q for easy transport . Release
the levers on the two castors with locking levers q by pushing the levers
upwards (see fig 5) . The appliance can now be rolled conveniently .
♦ Press the levers on the two castors with locking levers q downwards once
you have parked the appliance in order to prevent the appliance from rolling
away (see fig . 6) .
Fig . 5 Fig . 6
NOTE
► Use the castors only on even surfaces . Do not roll the appliance over
shag-pile carpets (e .g . flokati, tufted) . These could block the castors .
► Always hold the appliance by the two integrated carrying recesses
5
to
lift it up .
First use
NOTE
► Make sure the REV/OFF/AUTO/FWD switch 8 is in the OFF position
before plugging the appliance into the power socket .
► Every shredder is tested for functionality after manufacture . It is possible
that you may find paper residue in the cutting blades .
♦ Insert the plug into a mains power socket .