50
ULG 350 B1
GB
MT
Preparing for hot lamination
♦
Insert the plug of the laminator into a mains power socket.
♦
Switch the appliance on by pushing the On/Off switch
5
to the “ON” posi-
tion. The red Power indicator light
2
lights up.
♦
Set the selector switch for hot and cold lamination
6
to “HOT”.
♦
Place the pouch thickness switch
4
at the corresponding pouch thickness
(see also chapter
Switching levels
).
NOTICE
►
The attainment of the operating temperature is indicated by the glowing
of the green indicator light Ready
3
. For a more uniform laminating result
we recommend, especially for thinner foils (below 125 Micron), and after
adjustment to a diff erent foil thickness, to fi rst wait an additional 2-3 minutes
before beginning with lamination.
♦
Place the document to be laminated into a laminating pouch of the
appropriate size.
NOTICE
►
Ensure that all edges of the document have at least two millimetres of
space to the edges of the laminating pouch, as shown in Fig. 1.
►
Ensure that you use only one pouch for laminating. First open it up, as
shown in Fig. 2.
►
For further information about the lamination process, please read the
section
Lamination process
.
Fig. 1
Fig. 2
IB_114218_ULG350B1_LB5.indb 50
20.07.15 09:20
Summary of Contents for 114218
