2
5.
Both wireless signal router functions, transmission system may
extend the terminal host and detector distance.
三、
Installation Operation
1.
First WPW-220 connected to the power outlet, then will enter the boot
mode, the blue light on the front of the boot will be completed after
about 90 seconds of constant light. If you want to skip this program,
press the SET button.
2.
To register the first to prepare the upper device - Press Gateway
(Host) or short press Router (router) behind the SET button, then
press the SET button on the side of the machine. In this case the host
device and this opportunity within about 15 seconds flashing lights;
when the connection is successful, the host device and the machine's
LED light will flash at the same time long after the close, that has
successfully paired connection.
3.
If the connection fails, the second party device will flash after 15
seconds in length at the blue lights.
4.
Transparent front LED button to control the power state, blue light
indicates power output.
5.
Power Measurement: When I want to measure the electrical
connector socket on the machine, turn the power output starts
automatically calculate the voltage, current, power. (Need to use
power measurement value for at least one hour)
6.
Price calculation: please set by the web user interface peak, off-peak
electricity price and time, and set the time of desire accumulated (in
months, up to three months), the system automatically calculates the
total price, and to distinguish between peak, off-peak electricity (as far
back in 1 year)
7.
Power measured values via web, mobile APP, wireless terminal
controller made, APP achieved price calculated values via web,
phone.
8.
Releasing the connection: Press the sides of the machine SET button
until flashing green light goes out and then release, the unit for about
three seconds after the long flashed blue lights, that means lifting
successful connection.
四、
Precautions
1.
The maximum current load of 10A / 120V, 1200W
