background image

IMP54-05

www.ueonline.com

Type J54S models 610-614

Type J54S models 22-28

Type H54, J54 & J54A models 22-28

Type H54S models 22-28

Type J54 models 610-614

Dimensions

Dimensional drawings for all models may be found at www.ueonline.com.

Type H54, J54, & J54A models 126-164

Summary of Contents for 54 Series

Page 1: ...the pressure signal into an electrical signal Control set point may be varied by turning the adjustment hex on J types or a reference adjustment dial on H types See Adjustment PART II PROOF PRESSURE LIMITS STATED IN THE LITERATURE AND ON NAMEPLATES MUST never be exceeded even by surges in The system Occasional operation of unit up to proof pressure is acceptable e g start up testing continuous ope...

Page 2: ...n end wrench turn main adjustment screw counterclockwise right to lower set point or clockwise left to raise set point Turning the 1 4 hex screw clockwise until high set switch transfers at the target pressure point provides a pressure rise set point See Figure 4 Low Set of Range Usinga1 4 openendwrench turn lowset adjustmentscrewcounterclockwise right to lower set point or clockwise left to raise...

Page 3: ...J54S models 610 614 Type J54S models 22 28 Type H54 J54 J54A models 22 28 Type H54S models 22 28 Type J54 models 610 614 Dimensions Dimensional drawings for all models may be found at www ueonline com Type H54 J54 J54A models 126 164 ...

Page 4: ...for critical applications where damage could endanger property or personnel Electrical ratings stated in literature and on nameplate must not be exceeded Overload on a switch can cause damage even on the first cycle Wire unit according to local and national electrical codes using wire size recommended in installation sheet Do not mount unit in ambient temp exceeding published limits LIMITED WARRAN...

Reviews: