14
NOTE: The controller keeps a differential of at least 1 degree between the HEAT set point and
COOL set point (HEAT is always less than COOL).
D. Setting the Humidity set point for weekdays schedule.
1. Complete the settings in B & C above.
2. Press
Prog
button: Humidifier and the humidity set point will flash. To change the humidity,
press the
button to increase or
button to decrease.
E. Setting the time, cool, heat & humidity set-point for programs 2, 3 & 4
Repeat the procedure B – D for program events 2, 3 and 4 the weekdays.
NOTE: The day cursor will continue blinking on weekdays, while the program display will change
in sequence of 2, 3 and 4.
F. Setting the time, cool, heat & humidity set-point for Saturday &
Sunday
1.
Complete the setup for the weekdays, then press
Prog
button to advance to Saturday; then
repeat procedure B-D.
NOTE: The day cursor will now blink on SAT; the program display will start from program 1 and
progressively move to 2, 3 & 4.
2. On completing Saturday, press
Prog
button to advance to Sunday and complete procedure B-D.
NOTE: The day cursor will now blink on SUN, the program display start from program 1 and
progressively move to 2, 3 & 4.
NOTE: When in programming mode, you can press Clock button repeatedly to change from
weekdays to Saturday, Sunday and out of programming mode.
Prog
Prog Clock Mode Hum Auto Reset
Fan
Prog Clock Mode Hum Auto Reset
Fan
I
