EXCEL ASSISTED BATH
USER GUIDE
EXCEL
–
Height-adjustable bath with Powered Swing Seat
To lift the seat out of the bath, press the “Seat out” button. This will lift the seat up. Continue to press the “Seat out”
button and the seat will automatically swing out of the bath and then lower on the outside. Continue to press until the
seat is at the required height.
To put the seat into the bath, press the “Seat in” button to raise it up. Continue to press the button and the seat will
automatically swing over the bath and then lower into the bath.
N.B. You can stop the seat at any point by lifting your finger off the button, should you wish to assist the bather in any
way.
Ensure there is no obstruction in the way of the seat as it swings out of the bath
To lift the bath p
ress the “Bath up” button until the bath reaches the required height. To lower the bath, press the
“Bath down” button.
N.B. The bath will only go up or down when the seat is fully lowered inside it.
The seat will only rise or lower when the bath is in its fully lowered position.
GENERAL POINTS;
N.B. DO NOT turn the power off to the bath as the batteries will lose their charge and the seat/bath will then not
move. If there is a power cut whilst the bath is being used, there will be an audible alarm sound and it will only be
possible to lower the bath to the ground and the seat will only swing out of the bath. The bath will not work again
until the mains power has been re-connected. If the mains power is off for a prolonged period, it may be necessary to
charge the batteries for a few hours before using the bath.
Cleaning
The bath may be cleaned using most mild cleaning agents.
Chemical agents and solvents must not be used, i.e. drain/oven cleaners, acetone, or acids.
The taps, side and end panels and handset should be cleaned using a warm soapy solution and wiped dry.
Guarantee
This product is guaranteed against all manufacturing defects for one year. This does not affect your statutory rights
.