February 21, 2023
TB162 scanner setting question?
1. Do we need to scan the barcode from the manual to set the language?
→
Yes
2. Will the setting remain when TB162 is suspended?
→
Yes
3. Will the setting remain when the battery remove/insert?
→
Yes
4. Will the setting be set to default when the factory resets the TB162?
→
No. Please use the reset to default barcode in UG to reset the barcode to
default Reset the Custom Defaults.If you want the custom default settings
restored to your scan engine, scan the Activate Custom Defaults bar code below.
This is the recommended default bar code for most users. It resets the scan
engine to the custom default settings. If there are no custom defaults, it will reset
the scan engine to the factory default settings. Any settings that have not been
specified through the custom defaults will be defaulted to the factory default
settings.
Note: To remove custom defaults, see "Resetting the Factory Defaults" on page
8-162.
Can TB160 support glove ?
1. Can support gloves thickness of less than 1mm
2. Suggest to use 8mm capacitive stylus (384896G)
