Chapter 4
Advanced Setting
27
The following security system architecture demonstrates an open-loop disconnecting the door sensor
and triggering the security alarm in MT180.
You can put or lift security ban by the same proximity card used in access control or time attendance
mode. Follow instructions below to utilize MTTool to optimize your security settings.
1.
Connect Pin 4 (CHECK) to Pin 9 (GND).
2.
Connect Pin 5 (SAFE) to Pin 10 (GND).
3.
Set MT180 and your computer on the same subnet network.
4.
Execute MTTool on your computer.
MT180
in alarm status
Door Sensor
Window Sensor
Open-Loop
Alarm
!