5.1.7. Data
The Data option allows you to type in data to write or view data from a read, as shown in Fig.
72. And the maximum length of this Data option is also limited by the Length option, which is
32 words.
Fig. 72. Typing in the data
5.1.8. Operations
5.1.8.1. Read
The Read option allows you to do a read operation to the tag, and then the tag returns its
memory to the option of Data, as shown in Fig. 73. In the instance of Fig. 73, you can see
that the tag returns its memory of the User bank with two words offset and six words length
to the buffer of the Data option, which has 24 zero characters in this case. In addition, the
Log section under the bottom gives three successful messages in the process of targeting
the tag, calling the API, and doing the operation.
Fig. 73. The Read operation
43
