Operating Mode
USB
SPP
mode
*BT
SPP
mode
Buffer
mode
Note
:
•
The “*” indicates the default setting.
•
The data will be temporarily saved in the
reader under Buffer Mode
Read Mode
*Single read
Multiple read
Counter read
Rapid read
Power Setting
11-27 dBm (*22 dBm)
Beep Setting
High
Medium*
Low
Mute
Vibrate Setting
*Enable
Disable
Auto Power-off
Disable
1-3/5/10 min (*2 min)
Factory Default
Enable/Disable
Setting Page
Data
Format
*Hex
ACII
Tag-Info
*EPC
USER (0~5)
TID
Tag-Unique
*by EPC
by Tag-Info
Terminator
None/Null
CR/LF
Tab
HID Char-Delay
1ms
5ms
*10ms
20ms
50ms
100ms
Information
FW Version
Serial Number
MAC Address
SKU ID
Temperature
Note:
SKU ID: 1 = EU, 2 = US, 3 = JP
Note
:
For more details, please refer to RP902 MFi
User’s Manual which can be download through
https://www.ute.com/en/products/detail/RP902MFi
Power Up
•
Short press the Power / Trigger Key to power up, and you will
hear short beeps (SPP mode: 1 beep/Buffer mode: 3 beeps)
with green flash appears on the communication LED, then the
LCD screen will appear.
Shut Down
•
Long press the Select Down / Power Off button for about 3
seconds to shut down the terminal.
Start-up Screen
Power Up/ Shut Down
Setting Page
Enter the
Setting Page
Short press Function / Select Up Key
Enter
Short press Power / Trigger Key
Up
Short press Function / Select Up Key
Down
Short press Select Down /
Power Off Key
Read Mode
Single read:
Short press Power / Trigger Key
Multiple read:
Keep pressing Power / Trigger Key
Counter read:
Press and hold the Power / Trigger key
Rapid read:
Short press Power / Trigger Key
Note
: Please select the multiple reading mode to enable
Continuous Reading.
Return to Scan Page
Long press Function / Select Up Key about 3 seconds
Power On / Off
Power On
Short press Power / Trigger Key
Power Off
Long press Select Down / Power Off Key
about 3 secs
