
Format:
?
STX ESC ‘y’ CS1 CS2 ADDR
?
ACK or NAK
2.4
Host Commands
1. Set MULTIPOINT Address ( ESC 5)
Format:
?
STX ESC ‘5’ <addr> CS1 CS2 ADDR
;<addr>=‘A’~’Y’ or ’0’~’6’
?
STX ESC ‘5’ <retcode> CS1 CS2 ETX ;<retcode>= 00H
successful
;
= 01H
error
7
Description: The command will change PT600
MULTIPOINT address.
2. Warm Start ( ESC A )
Format:
?
STX ESC ‘A’ CS1 CS2 ADDR
?
ACK or NAK
Description: The command causes PT600 stop program execution and return
to Ready Mode. Programs and data that have been stored in the
PT600 RAM space are preserved. The system parameters
remain unchanged. The equivalent keypad invoking sequence is
pressing CMD and then the ALPHA key.
Summary of Contents for PT600
