Unitech Electronics Co., Ltd.
Modified
by Ling
PA968 Operation
Manual
V1.0
Page 33 of 117
9. Double tap “Aimer cycle duration”. Drag to define the amount of time that the
aimers flash during a bar code capture. After that time, the aimers remain off
until a decode or a “No Read Timeout” is reached.
10. Check “Center window decode”. Scan a symbol that intersects a rectangle
specified by the center window. The symbol should be returned.
11. Double tap “Center window width” and “Center window height”. Drag to
define the percentage of width and height of the center decode rectangle,
relative to the entire image.
