Unitech PA962 Product Reference Manual Download Page 19

Page: 19 / 51

Product Reference Guide

“

Backup Battery Very Low

”

icon

: When

displayed indicates the backup battery is

very low. Stopping the operation and charg-

ing the PA962 immediately is highly

recommended.

“

Battery Very Low

”

icon

: When displayed

indicates the battery is very low. Stopping the

operation and charging the PA962 immedi-

ately is highly recommended.

“

Battery Low

”

icon

: When displayed

indicates the battery is low and needs to be

charged. In other words, there is no external

power supply, the battery charge is low or

very low, and charging the PA962

is recommended.

Power Status Indication

Four different icons are displayed on the status bar to indicate the on-board power

status.

“

Backup Battery Low

”

icon

: When

displayed indicates the backup battery is low

and needs to be charged.

Backup Battery Low

“

Plug

”

icon

: When displayed, this icon

indicates that the battery is charging. The

PA962 is either plugged-in via the DC

12V/2A power adapter or in the docking

station.

Plug with power adapter

Battery Low

Battery Very Low

Backup Battery Very Low or Backup

Battery is not turned on.

No icon

: When displayed means there is

no external power supply to the PA962 but

its battery power status is good.

וֹ כּ מּף

ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף

ۖ ףףףף

wwwِpdffactoryِcom

Summary of Contents for PA962




















































Search results

Summary of Contents for PA962

Reviews:

Related manuals for PA962

Brands by name

Popular brands

Unitech PA962, Product Reference Manual

Search results

Summary of Contents for PA962

Reviews:

Related manuals for PA962

Brands by name

Popular brands