-
2.24 Only send single command decoding chip
Function Description:
Send command to decoder chip. This is a variation of command
HAM_SendCommand.
It sends
following command to Hamster: (note, only two bytes without BCC)
Esc, 0x80+cmd
Function call:
BOOL
HAM_SendCommand1(
BYTE
cmd
)
;
Parameter: (input)
cmd:
BYTE:
command
Return:
TRUE = indicates the command has been successfully sent to queue to output.
2.25 Send command to decoding chip
Function Description:
Send command to decoder chip. This is a variation of command
HAM_SendCommand.
It will read
a number of parameters and packet them as in following format and send it to decoder chip.
Esc, parameter1, parameter2, …, BCC
The total number of parameters is specified by first parameter num.
Function call:
BOOL
HAM_SendCommand2(
BYTE
num,
BYTE
parameter1, …
)
;
Parameter: (input)
num:
BYTE:
number of total parameters
parameter
x
BYTE:
Parameter
Return:
TRUE = indicates the command has been successfully sent to queue to output.
2.26 2D imager supporting for PA966/967
2D supporting API is described on individual document. Please get it from
http://w3.tw.ute.com/pub/cs/manual/WinCE_programming_manual/2D_Engine_SDK.pdf
