- 5 -
Charging the Battery
For initial use, you need to charge your device for about 16 hours. After that,
you can charge it everyday to recharge the battery to full capacity. You can
charge your device using the USB charging cable or the docking station.
CAUTION!
Operating the PA520 for the first time without the AC adapter, and
without fully charging the backup battery may result in loss of data
stored in RAM memory.
NOTE:
Data you entered may not be properly stored until the internal backup
battery has been fully charged.
To charge the device using the USB charging cable:
1. Attach the clip plug to the AC adapter, if necessary. Slide the replaceable
clip plug into the AC adapter until it locks into place with an audible click.
2. Press and hold the connector button on the
USB charging cable and connect it to the
PA520 (1).
3. Plug the AC adapter cable into the power
jack on the USB charging cable (2).
4. Connect the AC adapter into an electrical
outlet (3).
To charge the device using the docking station:
1. Plug the AC adapter cable into the
power jack on the docking station.
2. Plug the AC adapter into an electrical
outlet.
3. Slide the device into the docking station
until it clicks into place.
