5
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Setting up the PA500II
Perform the following set up tasks to begin using your device:
Install the battery pack.
Charge your device.
Power on the PA500II
Installing the Battery
WARNING!
There is a risk of fire and burn if the battery pack is handled
improperly. DO NOT disassemble, crush, puncture, short external
contacts, or dispose the battery pack in fire or water. DO NOT
attempt to open or service the battery pack. Dispose of used
batteries according to the local recycling guidelines in your area.
A backup battery cell is embedded into your device to prevent data loss when
the removable battery pack is removed or completely discharged. The backup
battery will keep the data and system settings up to 1 hour if the main battery is
removed.
NOTE:
To enable the internal battery cell to provide backup power supply,
charge your device with the main battery pack for at least three and a
half hours.
1. Position the battery pack, making sure the battery pack fits the shape of
the battery compartment.
2. Slide the battery pack into the battery bay. The battery pack locks to the
chassis with an audible click.
